Front Moulding
Front Moulding I have a maytag front loader (NEPTUNE),that has mold inside,can not get it out,what to do? The mold is around the seal of the door(mainly bottom) Have you tried any of the produc...
Front Moulding
The magic of molding and Trimwork
Did you know that the addition of castings and trimwork and instantly change boring and ordinary square room in an elegant living space? The amount of character added with moldings and trimwork is of great substance.
Given that most people can install molding is a safer way to add real class to any room or house.
Today I would like to review some basics with you and let me start at the grassroots level. From the simplicity of 1950 has been the main factor in home builders, therefore no ornaments and architectural details. The point I'm getting in this case is that of molding and trimwork used as a design tool to add and remove excellent boring. Not to mention adding trimwork often makes the room look larger.
The most common type of mouilding is guts. Casings are used to frame doors and windows. Just about every door has a casing that surrounds it. Go and take a look at the door of his bedroom. There is more than likely that a case for framing the door and add a picture attractive entry. Now step back and imagine that doorway without the cover and the door is flush with the wall. That does not look good at all right?
Another good example of a deck is a window ledge. This value trimwork 5 inches at the bottom of the window adds instant elegance to the window.
Adding guts not too difficult. There are plenty of guides out there. In fact, you can choose from detailed guides at your local home improvement.
From casings are usually already there around windows and doors are going to spend some more and molding trimwork. Crown moldings and chair bar. These are examples of horizontal trimwork. A molding runs along the top of the wall against the ceiling. This adds instant beauty to a living space. Crown moldings are available in different sizes and types materials.
Chair rails are used as decorative trimwork to divide a common wall in two different areas. This causes endless decoration possibilities.
base molding is another common example. This molding is used in the bottom of a wall where it meets the floor. Used as a transition material to add decorations. Most bases are about 4-5 inches tall, but can vary widely depending on the size of the wall and the preference owner. It is important to take into account the size of the wall and the room to determine the appropriate size of a database. As with crown molding, if you choose too much large becomes an eyesore rather than a nice accent.
You can get all kinds of molding in many different materials. Your project dictate what type of material to use.
For most indoor projects I would suggest real wood trim. Paint grade poplar is the most common species of wood to buy in. However, this is not good for stains. If you want the look of real wood, pick up your molding in maple or red oak, perhaps. Stained real wood trim look fantastic. There is no other way to say it.
outdoor projects I would suggest polyurethane materials. polyurethane moldings look like wood, but standing in the sun and weather much better with time. It is still relatively cheap too.
For starters, expect a degree of a learning curve when it comes to installation. Installation will take some time. There are several how-to's out there and I suggest you look at some of them. Take your time and your project is sure to have great results.
Look around examples of moldings and trimwork installations to find inspiration for the project. There are virtually endless options when it comes to their options for the size, shape and materials.
Good luck with your project!
About the Author
David Chauvin has been in the millwork industry for over 30 years. For custom mouldings and millwork visit YourMillWorkSource.com